CHANNEL_STATUS
| Property | Value | Alert | Description |
|---|---|---|---|
| STATUS | 1 | Good | INACTIVE. The channel state is not in error however it is not currently running. |
| STATUS | 2 | Good | RUNNING. The channel is in a good running state |
| STATUS | 3 | Warn | STARTING. The channel is currently starting. This is a transient state. |
| STATUS | 4 | Warn | STOPPING. The channel is currently stopping. This is a transient state. |
| STATUS | 5 | Warn | STOPPED. The channel is currently stopped. This should be considered an error state however administrators may STOP a channel during change activity. |
| STATUS | 6 | Warn | REQUESTING. The channel is currently requesting. This is a transient state for Requester channels. |
| STATUS | 7 | Warn | INITIALIZING. The channel is currently initializing. This is a transient state for Requester channels. |
| STATUS | 8 | Warn | SWITCHING. The channel is currently switching. This is a transient state. |
| STATUS | 9 | Warn Critical | BINDING. The channel is currently binding and trying to connect to the remote end. Binding is a transient state however it should be considered an error if this state lasts for more than a few minutes. Some in error channels can get stuck in a binding state. |
| STATUS | 10 | Critical | RETRYING. The channel is currently retrying and trying to connect to the remote end. Retrying should be considered an error state. |
| STATUS | 11 | Critical | PAUSED. The channel is currently paused. This is a transient state however it should be considered an error if this state lasts for more than a few minutes. |
| STATUS | 12 | Critical | DISCONNECTED. The channel is currently disconnected. This is a transient state however it should be considered an error if this state lasts for more than a few minutes. |
| CONNS | < 1 | Warn Critical | This is the number of ACTIVE connections made to the SVRCONN channel. |
QUEUE_STATUS
Suggested values only.
| Property | Value | Alert | Description |
|---|---|---|---|
| QUEUE | String name | NA | The is the name of the queue to filter the status values on. |
| OPPROCS | < 1 | Warn | This is the number of handles that are currently open for output for the queue. |
| IPPROCS | < 1 | Warn | The number of handles/connections that are currently open for input for the queue (either input-shared or input-exclusive). This number does not include handles that are open for browse. |
| CURDEPTH | > 50 | Warn | The current depth of the queue, that is, the number of messages on the queue, including both committed messages and uncommitted messages. |
| CURDEPTH | > 100 | Critical | The current depth of the queue, that is, the number of messages on the queue, including both committed messages and uncommitted messages. |
| lastGetIntervalSecs | > 5 | Warn | This gives the relative number of seconds since the last get was performed on the queue. The number of seconds is calculated from; (Current System time - Last Get Time) = interval A value of -1 means the metric is invalid NOTE: If a -1 is not expected then you may need to set the MONQ property on the queue manager to MEDIUM. ALTER QMGR MONQ(MEDIUM) |
| lastGetIntervalSecs | > 10 | Critical | This gives the relative number of seconds since the last Get was performed on the queue. The number of seconds is calculated from; (Current System time - Last Get Time) = interval A value of -1 means the metric is invalid NOTE: If a -1 is not expected then you may need to set the MONQ property on the queue manager to MEDIUM. ALTER QMGR MONQ(MEDIUM) |
| lastPutIntervalSecs | > 5 | Warn | This gives the relative number of seconds since the last Put was performed on the queue. The number of seconds is calculated from; (Current System time - Last Put Time) = interval A value of -1 means the metric is invalid NOTE: If a -1 is not expected then you may need to set the MONQ property on the queue manager to MEDIUM. ALTER QMGR MONQ(MEDIUM) |
| lastPutIntervalSecs | > 10 | Critical | This gives the relative number of seconds since the last Put was performed on the queue. The number of seconds is calculated from; (Current System time - Last Put Time) = interval A value of -1 means the metric is invalid NOTE: If a -1 is not expected then you may need to set the MONQ property on the queue manager to MEDIUM. ALTER QMGR MONQ(MEDIUM) |
| MSGAGE | > 5 | Warn | Age, in seconds, of the oldest message on the queue. The maximum displayable value is 999999999; if the age exceeds this value, 999999999 is displayed. |
PUBSUB_STATUS
Property | Value | Alert | Description |
|---|---|---|---|
STATUS | 0 | Critical | ERROR |
STATUS | 1 | Critical | REFUSED |
STATUS | 2 | Warn | STOPPING |
STATUS | 3 | Warn | INACTIVE |
STATUS | 4 | Warn | STARTING |
STATUS | 5 | Good | COMPAT |
STATUS | 6 | Good | ACTIVE |
QMGR_STATUS
Property | Value | Alert | Description |
|---|---|---|---|
STATUS | 0 | Critical | STOPPED. The queue manager is not running or cannot be contacted. NOTE: In some cases the queue manager may still actually be running but cut off from Lamaxu due to network issues. |
STATUS | 1 | Warn | QUIESCING. The queue manager is in the process of being shut down. |
STATUS | 2 | Good | STANDBY. The queue manager is running as standby. |
STATUS | 3 | Good | STARTING. The queue manager is starting up. |
STATUS | 4 | Good | RUNNING. The queue manager is running normally. |
LISTENER_STATUS
Property | Value | Alert | Description |
|---|---|---|---|
STATUS | 1 | Critical Warn | STOPPED. The listener is stopped or not running. |
STATUS | 2 | Good | RUNNING. The listener is running normally. |
PAGESET_USAGE (ZOS Only)
| Property | Value | Alert | Description |
|---|---|---|---|
| STATUS | 0 | Good | The PAGE SET is AVAILABLE |
| STATUS | 2 | Critical | The PAGE SET is OFFLINE |
| STATUS | 4 | Warn | The PAGE SET is SUSPENDED |
| PAGESET_ID | Page set ID value | NA | The pageset id value to filter on |
| UNUSED_PAGES | Integer Value | This is the number of free pages for the PAGESET_ID. An alert should be raised if this falls below a specified value. |
SUBSCRIPTION_STATUS
| Property | Value | Alert | Description |
|---|---|---|---|
| CURDEPTH | > 50 | Warn | The current depth of the base subscriber queue, that is, the number of messages on the queue, including both committed messages and uncommitted messages. |
| CURDEPTH | > 100 | Critical | The current depth of the base subscriber queue, that is, the number of messages on the queue, including both committed messages and uncommitted messages. |
| lastMsgIntervalSecs | > 5 | Warn | This gives the relative number of seconds since the last message was sent to the subscriber. The number of seconds is calculated from; (Current System time - Last Message Time) = interval A value of -1 means the metric is invalid |
| lastMsgIntervalSecs | > 10 | Critical | This gives the relative number of seconds since the last message was sent to the subscriber. The number of seconds is calculated from; (Current System time - Last Message Time) = interval A value of -1 means the metric is invalid |